What to bring to the jobsite ?
Please refer to the explanations below.
There are two ways of correcting the GNSS data to go from raw GNSS accuracy (several meters) to corrected accuracy (just a few centimeters), for usage on the jobsite:
- The first method Real Time Kinematic (RTK) uses localization based on network RTK. The DJI Phantom 4 RTK Drone has an internal network receiver where you can insert a sim card.
- The second method Post Processing Kinematic (PPK) uses localization
- based on a known point
- or uses the SC Edge as a RTK network receiver on the jobsite.
Please sign in to leave a comment.